Posts in Category DAQ

Webinar Summary – Boost Your SPM Applications: From Kelvin Probe to Time-Resolved Measurements

on 19.10.2020 at 17:03 by Romain Stomp on Blog of Romain Stomp
Following up on the webinar dedicated to Kelvin Probe Force Microscopy (KPFM) techniques, I’d like to post a short summary in this blog as well as answers to most questions raised during this event. The recording of this webinar can […]

Sensor Characterization and Control

on 25.05.2020 at 08:00 by kivanc on Blog of Kivanç Esat
Sensors come with different flavors. They can be inertial devices for motion detection; can be based on photosensitive materials; can be absorbing surrounding molecules to detect their concentration, and so on. Developments in micromachining and micro/nanoelectromechanical system (MEMS/NEMS) technologies lead to miniaturization and low power consumption. Hence, multiple sensors […]

Choose the right tool to acquire Lock-in data

on 20.02.2020 at 10:03 by kivanc on Blog of Kivanç Esat
A crucial part of setting up an experiment is to integrate proper instrumentation to collect and save data. It is important not only to have correct results but also to ensure an efficient workflow. This blog post and related video […]

DFRT revisited: from feedback optimization to full DAQ acquisition

on 18.02.2020 at 18:17 by Romain Stomp on Blog of Romain Stomp
The Data Acquisition module (DAQ) in LabOne has been addressed in 2 recent blog posts: A deep dive into data acquisition with the DAQ tool & Choose the right tool to acquire lock-in data. One other great application area for […]

A deep dive into data acquisition with the DAQ tool

on 25.11.2019 at 14:21 by moritz on Blog of Moritz Kirste
Introduction Looking at the heart of experimental science you will find data acquisition. Why? Because even the most perfectly conceived experiment is worth nothing if nobody acquires, analyzes and stores data for further analysis and reproduction of results. Despite its […]

Categories