Posts in Category LabOne

Webinar Summary – Boost Your SPM Applications: From Kelvin Probe to Time-Resolved Measurements

on 19.10.2020 at 17:03 by Romain Stomp on Blog of Romain Stomp
Following up on the webinar dedicated to Kelvin Probe Force Microscopy (KPFM) techniques, I’d like to post a short summary in this blog as well as answers to most questions raised during this event. The recording of this webinar can […]

Sensor Characterization and Control

on 25.05.2020 at 08:00 by kivanc on Blog of Kivanç Esat
Sensors come with different flavors. They can be inertial devices for motion detection; can be based on photosensitive materials; can be absorbing surrounding molecules to detect their concentration, and so on. Developments in micromachining and micro/nanoelectromechanical system (MEMS/NEMS) technologies lead to miniaturization and low power consumption. Hence, multiple sensors […]

Control Your Measurements With QCoDeS and Labber

on 24.05.2020 at 19:08 by andrea on Blog of Andrea Corna
With this blog post, we introduce a new high-level Python programming interface for Zurich Instruments devices: the Zurich Instruments Toolkit. It is the basis of our new support for QCoDeS and Labber measurement frameworks. A modern experiment can nowadays be a […]

Choose the right tool to acquire Lock-in data

on 20.02.2020 at 10:03 by kivanc on Blog of Kivanç Esat
A crucial part of setting up an experiment is to integrate proper instrumentation to collect and save data. It is important not only to have correct results but also to ensure an efficient workflow. This blog post and related video […]

DFRT revisited: from feedback optimization to full DAQ acquisition

on 18.02.2020 at 18:17 by Romain Stomp on Blog of Romain Stomp
The Data Acquisition module (DAQ) in LabOne has been addressed in 2 recent blog posts: A deep dive into data acquisition with the DAQ tool & Choose the right tool to acquire lock-in data. One other great application area for […]

SPM community brought together in Zurich

on 03.06.2019 at 10:16 by Romain Stomp on Blog of Romain Stomp
Zurich Instruments User Meeting
“Jamais 2 sans 3,” as the French say, where number three worked as a charm. For this 3rd SPM User Meeting, we were able to host the meeting in our home city and brought together more users than ever before […]

How to measure PLL/PID bandwidth under real experimental conditions

on 14.11.2017 at 10:52 by Romain Stomp on Blog of Romain Stomp
With the merging of PLL and PID tab in LabOne for MFLI and UHFLI, the PID Advisor section is now identical for both type of feedback loops and various system models can be tested. After all, a Phase Locked-Loop (PLL) […]

LabOne Imaging: Software Trigger’s new Grid Mode

on 27.09.2016 at 11:32 by Daniel on Blog of Daniel Wright
An image obtained using SW Trigger's Grid Mode.
In LabOne Release 16.04 the Software Trigger receives a powerful extension, Grid Mode, which organises the triggered data in a 2-D matrix allowing image construction direct from LabOne. This blog explains how this new functionality works and describes its most […]

Working with LabOne Software Trigger Data in Matlab

on 18.04.2016 at 10:42 by Daniel on Blog of Daniel Wright
LabOne’s Software (SW) Trigger allows the user to save bursts of instrument signals (e.g. its demodulator samples or a PID controller’s error value) when a specified trigger condition is met. The SW Trigger works much in the same way as […]

LabOne for HF2: using digital lines as trigger sources

on 03.02.2016 at 11:39 by Romain Stomp on Blog of Romain Stomp
Since LabOne 15.11 release and onward, accessible from our download area, all HF2LI users with the enabled HF2LI-WEB option can now benefit from the latest software developments that were previously reserved for the UHFLI. One tool that is now totally new for this […]

Zurich Instruments Users Meeting in Leiden, The Netherlands

on 17.06.2015 at 11:58 by Daniel on Blog of Daniel Wright
On June 3rd my colleague Romain Stomp and I welcomed Zurich Instruments users with a focus in Scanning Probe Microscopy (SPM) to visit us for the day at Leiden University in the Netherlands. In the morning, Romain shared his expertise with a presentation outlining […]

Categories