Posts tagged HF2LI

Dynamic Plotting of HF2 Lock-in Data with Python

on 03.11.2011 at 18:06 by Lara Juricic on Blog of Jürg Schwizer
The Matplotlib is a library for creating 2D plots of arrays in Python. The purpose of this blog entry is to depict a general approach to enable continuous updating of figure data during the Python script execution. The figure update functionality is useful for plotting measurement data that is recorded with the Zurich Instruments HF2LI Lock-in amplifier.

Exploring the HF2LI-MOD: Measuring Bessel Functions

on 20.10.2011 at 12:40 by Andrin on Blog of Andrin Doll
In this post, I demonstrate the capabilities of the HF2LI-MOD upgrade by demodulating 4 FM sidebands simultaneously. With the help of a basic sweep routine programmed in LabVIEW, I measure 5 Bessel functions by direct sideband demodulation of an FM signal. This post might give you an inspiration on how to improve your measurement sensitivity by introducing an advanced demodulation scheme of multiple sidebands.

Controlling Zurich Instruments Devices with LabVIEW

on 06.09.2011 at 14:56 by Andrin on Blog of Andrin Doll
With Zurich Instruments LabVIEW driver, you can integrate your device into complex laboratory setups and create your own graphical interface for simplified experiment control.The driver provides access to all adjustable parameters and measurement readings of your Instrument.
In this post, I explain on the VIs included in our LabVIEW driver and on a simple example on parameter setup and data streaming. LabVIEW beginners find a link to our Getting Started for guaranteed programming success in LabVIEW.

Controlling the HF2LI Lock-in with Python

on 04.05.2011 at 16:45 by Lara Juricic on Blog of Jürg Schwizer
This blog entry contains a basic example how to communicate with HF2LI Lock-in using the Python programming language. This is achieved with an interface library of Zurich Instruments that transforms the ziAPI into a native Python interface.

Controlling the HF2LI Lock-in with Matlab

on 03.01.2011 at 10:33 by Jürg Schwizer on Blog of Jürg Schwizer
Controlling the Zurich Instruments device directly with Matlab is extremely powerful for repetitive measurements and scripting. This blog entry explains a method to communicate with the ziServer directly from Matlab. This interface is very fast and thus well suited to record large data sets at high-speed.

Loading HF2LI Lock-in Measurements with Matlab

on 06.12.2010 at 10:52 by Jürg Schwizer on Blog of Jürg Schwizer
R recorded with Zurich Instruments HF2
The combination of Zurich Instruments devices and Matlab is a powerful tool set to get your application measured. In a first step I show a method to load the demodulator data of the Zurich Instruments HF2LI lock-in amplifier into the Matlab workspace. This approach uses the graphical user interface of the HF2LI to save the data in binary format. In a later blog entry a will show another method which allows for direct control of the HF2LI from Matlab. This enables scripting and recording of large measurement data sets.

Categories