Posts tagged PLL

Enhancing the Luminosity Quality of Sulfur Plasma Lamps by the HF2PLL Phase-Locked Loop

on 07.12.2017 at 14:11 by Mehdi on Blog of Mehdi Alem
Introduction The choice of technology in lighting industry requires a trade-off between color rendering and luminous efficacy because the spectral sensitivity of the human eye varies with wavelength. As sustainable development has become a priority, the manufacturing industry of lighting […]

Optimizing PLL Performance with the PID Advisor and Auto Tune

on 27.07.2015 at 13:48 by brunok on Blog of Bruno Küng
Comparison of measured and simulated step response
Introduction LabOne provides two tools that save time and improve performance for anybody working with the UHF-PID controller: The PID Advisor and the Auto Tune feature. They allow automation of the feedback parameter tuning required to achieve the best PID (proportional-integral-derivative) controller performance. In […]

Listening to FM Radio with the UHFLI 600 MHz Lock-in Amplifier and PLL

on 17.04.2013 at 11:10 by Sadik on Blog of Sadik Hafizovic
A guy at Zurich Instruments soldered a 3.5mm headphone socket to a BNC cable and attached a 75-cm antenna wire to the Signal Input of our 600MHz UHFLI Lock-in Amplifier with UHF-PID PID/PLL option and was happily listening to FM […]

Connecting the Nanosurf Manual Controller to a Zurich Instruments HF2LI or HF2PLL

on 02.04.2012 at 09:39 by andreas on Blog of Andreas Senn
In March 2011, Nanosurf and Zurich Instruments announced a cooperation to establish the HF2PLL as official upgrade path for Nanosurf’s EasyPLL. This post shows how to connect Nanosurf’s Manual Controller to the Zurich Instruments HF2PLL. The Manual Controller combined with […]