Posts tagged SPM

Resonance enhancement: a tale of two data analysis methods

on 17.09.2019 at 11:37 by Romain Stomp on Blog of Romain Stomp
The Benefit and Challenge of using Resonance Enhancement Resonance enhancement technique is the fastlane toward raising signal well above the noise floor to increase signal-to-noise ratio (SNR) and dynamical range. Such an approach is common for Scanning Probe Microscopy (SPM) […]

SPM community brought together in Zurich

on 03.06.2019 at 10:16 by Romain Stomp on Blog of Romain Stomp
Zurich Instruments User Meeting
“Jamais 2 sans 3,” as the French say, where number three worked as a charm. For this 3rd SPM User Meeting, we were able to host the meeting in our home city and brought together more users than ever before […]

Tracking Resonance Frequency without Phase: the DFRT Method

on 18.10.2013 at 18:47 by Romain Stomp on Blog of Romain Stomp
For high Q-factor resonator (> 500), it is a common method for SPM application to use a Phase Locked Loop (PLL) to track the change in cantilever frequency: the high phase sensitivity at 90° guarantees accurate measurements and stable PID […]

Categories