Posts tagged ziControl

Dynamic suppression of unwanted frequency components with an HF2LI

on 26.06.2015 at 14:17 by Paolo Navaretti on Blog of Paolo Navaretti
There are many experimental situations in which the component of interest in a signal is not the strongest one, but some other related component, for instance the side bands in amplitude or frequency modulated signals. In such a case, the […]

Remote Access to HF2 Instruments on the LAN

on 07.06.2013 at 08:56 by James Wei on Blog of James Wei
As explained in the HF2 User Manual, users can configure in ziControl to connect to any ziServer host on the LAN i.e. remote client access to HF2 Instrument. This blog will sum up an easy two-steps procedure to do exactly […]

Loading HF2LI Lock-in Measurements with Matlab

on 06.12.2010 at 10:52 by Jürg Schwizer on Blog of Jürg Schwizer
R recorded with Zurich Instruments HF2
The combination of Zurich Instruments devices and Matlab is a powerful tool set to get your application measured. In a first step I show a method to load the demodulator data of the Zurich Instruments HF2LI lock-in amplifier into the Matlab workspace. This approach uses the graphical user interface of the HF2LI to save the data in binary format. In a later blog entry a will show another method which allows for direct control of the HF2LI from Matlab. This enables scripting and recording of large measurement data sets.

Categories